Exchange Server 2013 Enterprise  POP3客户端无法连接到EXCHANGE 服务器

最近接了一个CASE，搞定有点郁闷，研究了2天才找到问题原因，今天就给大家分享下：

Exchange版本：Exhange 2013 CU7

操作系统版本：Windows Server 2008 R2企业版 SP1

问题描述：部分POP3客户端无法连接到Exchange邮件服务器

症状

======

特定CAS服务器无法完成POP3连接

1.TELNET 110 端口服务无响应

2.配置账户失败

抓包分析

==========

根据抓包，我发现TELNET的包，到CAS-01都是有被收到的。但是SESSION直接被finished。

10384   3:39:10 PM 5/6/2015     10.0902274              BJ-DC-02      bj-cas-01     TCP     TCP:Flags=CE....S., SrcPort=51371, DstPort=POP 3(110), PayloadLen=0, Seq=1885023159, Ack=0, Win=8192 ( Negotiating scale factor 0x8 ) = 8192    {TCP:5238, IPv4:2189}

10385   3:39:10 PM 5/6/2015     10.0905016              bj-cas-01    BJ-DC-02      TCP     TCP:Flags=...A..S., SrcPort=POP 3(110), DstPort=51371, PayloadLen=0, Seq=895363624, Ack=1885023160, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152  {TCP:5238, IPv4:2189}

10386   3:39:10 PM 5/6/2015     10.0908833              BJ-DC-02      bj-cas-01    TCP     TCP:Flags=...A...., SrcPort=51371, DstPort=POP 3(110), PayloadLen=0, Seq=1885023160, Ack=895363625, Win=256 (scale factor 0x8) = 65536  {TCP:5238, IPv4:2189}

10387   3:39:10 PM 5/6/2015     10.0922646              bj-cas-01     BJ-DC-02      TCP     TCP:Flags=...A...F, SrcPort=POP 3(110), DstPort=51371, PayloadLen=0, Seq=895363625, Ack=1885023160, Win=256 (scale factor 0x8) = 65536  {TCP:5238, IPv4:2189}

10388   3:39:10 PM 5/6/2015     10.0923369              BJ-DC-02      bj-cas-01     TCP     TCP:Flags=...A...., SrcPort=51371, DstPort=POP 3(110), PayloadLen=0, Seq=1885023160, Ack=895363626, Win=256 (scale factor 0x8) = 65536  {TCP:5238, IPv4:2189}

10389   3:39:10 PM 5/6/2015     10.0947774              BJ-DC-02      bj-cas-01     TCP     TCP:Flags=...A...F, SrcPort=51371, DstPort=POP 3(110), PayloadLen=0, Seq=1885023160, Ack=895363626, Win=256 (scale factor 0x8) = 65536  {TCP:5238, IPv4:2189}

10390   3:39:10 PM 5/6/2015     10.0949663              bj-cas-01     BJ-DC-02      TCP     TCP:Flags=...A...., SrcPort=POP 3(110), DstPort=51371, PayloadLen=0, Seq=895363626, Ack=1885023161, Win=256 (scale factor 0x8) = 65536  {TCP:5238, IPv4:2189}

因此，建议客户检查

1.确保POP3 LOGGING 已经开启，需要准备一台测试用CLIENT  配合我们做账号配置

2.收集POP3  SETTING      

Get-PopSettings  |fl  >>C:\pop3.txt        ；请提供MBX-02 的IP 地址

收集Component State信息

Get-ServerComponentState   -identity “bj-cas-01”   >>C:\comp.txt

3.收集SDP日志包:

在CAS01服务器端收集SDP

1. Click on the link below.

2. Click on the Run button (recommended) to start the diagnostic process.

3. Follow the onscreen instructions to run the diagnostic on this computer, or on a different computer.

Please note that you can submit diagnostics results back to Microsoft 10 time(s) until: 2015-06-05.

For frequently asked questions about diagnostic data collection and uploading tools click the link below:

问题原因

==========

1.前端服务器 POPPROXY 组件处于INACTIVE状态

2.认证模式处于SecureLogin 需要加密再完成认证

解决办法

==========

1.将Requester 设为HealthAPI  运行   Set-ServerComponentState -Identity BJ-CAS-01  -Component PopProxy -Requester HealthAPI -State Active

2.使用PlainTextLogin  模式    set-popsettings -server BJ-CAS-01 -LoginType PlainTextLogin

【版权声明】
本站部分内容来源于互联网，本站不拥有所有权，不承担相关法律责任。如果发现本站有侵权的内容，欢迎发送邮件至masing@13sy.com 举报，并提供相关证据，一经查实，本站将立刻删除涉嫌侵权内容。